Product view
Tesla key cards shown are for product display and are not included.
Silver Openwork Metal Card Holder
A key card. A little more character.
One essential card, held by flowing silver metal lines. The sculpted openwork front keeps the card visible, while a short dark strap and key ring make it part of your everyday carry.
- Finish
- Silver
- Capacity
- One card
- Carry
- Key ring
Price · USD
US$29
Free US shipping · US$5/order to other supported destinations
Compatible card format: ID-1 bank-card dimensions. Test fit and tap function with your card and vehicle.
Every line finds its light.
Bright edges, quiet shadows, and a black card behind the openwork. The silver frame reveals its raised contours as the light shifts.
A small connection. Part of every day.
The short dark strap joins the metal frame to a key ring. A closer look at the ring, the connecting stud and the strap that bring the card into your everyday carry.
One card. Ready when you are.
A place beside the essentials you take into the car. Carry one bank-card-size Tesla key card in the open frame, with the ring and short strap close at hand.
Hold the loaded holder in one hand, bring the card area close to the driver-side B-pillar reader, then move it away after the vehicle responds. The supplied physical demonstration shows changes in that vehicle’s side-mirror position during use; response varies with the vehicle and its settings.
Try it with your own card and vehicle first. This accessory is not an official Tesla product.
Set it down. Keep it close.
Warm walnut, soft daylight, and the card that travels with you. A small silver object beside your everyday essentials.
Alongside the things you take with you.
A bag, one key card, and the silver lines you recognise. Everyday objects give the openwork frame a different setting.
The first moment, on walnut.
A separate lid and base, a silver openwork silhouette on the lid, and a dark fitted insert inside.
Includes one silver-tone card holder with attached short strap and key ring, plus one box. Display cards are not included.
One familiar card size.
Designed around one ISO/IEC 7810 ID-1 card (85.60 × 53.98 mm), the same flat card format as the Cyber holder. These are card dimensions, not the outside dimensions of the holder. Thick or embossed cards need a separate fit check.
The card, seen from the edge.
The dark card sits behind the silver frame. This view shows the edge and the way the two meet; fit still depends on your card thickness. Use one card and check that it sits securely.
Car key card
Bank-card-size Tesla key cards are the intended fit. For B-pillar unlocking, bring the card area close to the reader and test the position with your own vehicle.
Access & transit
ID-1-size access or transit cards can be tried in the single-card frame. Reading depends on the card antenna and each reader.
Everyday bank card
Designed around one standard-size card. Raised lettering, extra thickness and contactless payment behavior should be checked with your own card.
From car cards to everyday cards.
Designed for one flat ID-1 card (85.60 × 53.98 mm): a car key card, bank card, transit card or access card. Browse the cards below to see them in the holder.
Cards from United States first
United States · Chase Visa
American Express · Blue Cash Everyday
Rivian · Key Card
Visa · Demo card
Mastercard · Demo card
BMW · Service Card
United Kingdom · Monzo Mastercard
Shinhan · SOL Travel
Tmoney · Transit card
Hong Kong · Octopus
Japan · Suica
Swipe or use the arrows to explore
Cards shown are not included. Card versions may differ; check fit and tap with your own card.
Fit and reader notes
Each holder shows one card. All cards are demonstration examples and are not included. Visa and Mastercard are payment networks, not a single card shape or thickness. Third-party names identify the card examples; they do not imply endorsement. No additional vehicle, payment or transit reader tests are claimed.
Choose one card
Use one bank-card-size card; do not stack cards.
Check the fit
Check that the card sits securely. Stop if it resists; do not force it.
Test the tap
Try your own reader or vehicle before relying on the card as your only key or pass.
The details, clearly stated.
Approximate dimensions: length and width are estimated from sample photos; thickness is read from a caliper photo. Frame size excludes the strap and ring; overall length includes them laid out naturally.
- Finish shown
- Silver-tone metal
- Front & back
- Raised front; flatter, different back pattern
- Carry
- Short strap and key ring
- Card format
- ID-1 · 85.60 × 53.98 mm
- Capacity
- One card
- Frame length × width
- Approx. 9 × 6 cm
- Frame thickness
- Approx. 4 mm
- Overall length
- Approx. 16 cm
Two faces, different lines.
Both views show a Tesla key card inserted. The front reveals raised metal lines over the card; turn it over and the card face is exposed inside the silver frame.
Front · Card inserted
Raised silver lines reveal parts of the black key card.
Back · Card inserted
The card face is exposed, with the metal openwork behind it.
The front and back patterns are different, not mirror copies. With a card inserted, the card covers the openwork on the back. Cards shown are demonstrations and are not included.
See the empty back pattern
This view is deliberately shown without a card so the flatter back pattern is visible. It shows a different state from the loaded views above.
A little care, every day.
Wipe gently
Use a clean, soft dry cloth for fingerprints and dust. Avoid abrasive pads and metal polish until the finish is confirmed.
Keep it dry
Avoid soaking the holder and short strap. If they get damp, wipe them dry and let them air-dry before storage.
Check before carrying
Check that the card sits securely and the strap and ring are intact. Avoid rubbing the metal frame against other delicate items.
Before you carry it.
01What kind of card fits?
One bank-card-size card. The intended format is ISO/IEC 7810 ID-1 (85.60 × 53.98 mm). Card thickness and unusual embossed or layered cards can affect the fit; do not force a card into the frame.
02Can I use it with a Tesla key card?
Hold the loaded holder in one hand, bring the card area close to the driver-side B-pillar reader, then move it away after the vehicle responds. The supplied physical demonstration shows changes in that vehicle’s side-mirror position during use; response varies with the vehicle and its settings. Try it with your own card and vehicle first. This accessory is not an official Tesla product.
03Does the holder include a key card?
Includes one silver-tone card holder with attached short strap and key ring, plus one box. Display cards are not included.
04How many cards can it carry?
The page is designed around carrying one standard-size card. Stacking multiple cards is not recommended.
05Will NFC work through the frame?
NFC performance depends on the card antenna, the reader, and which part of the card touches the reader. The open-frame design leaves much of the card exposed, but it does not guarantee the same reading distance as a bare card.
06Can I use a bank or access card?
A card with bank-card dimensions is the intended fit. Payment and access behavior still depends on each issuer and reader; check the fit and tap function with your own card.
07Is the silver finish the only option?
This page shows the silver version. Other colors shown in supplier marketing are not part of this listing.
08Do the front and back have the same pattern?
No. The face with raised, uneven openwork lines is the front. The flatter openwork face is the back. The patterns are different, not mirror copies. With a card inserted, the card face is exposed on the back and covers the openwork. Ring position alone is not a reliable way to identify the face.
09What are the approximate dimensions?
The metal frame is approximately 9 × 6 cm and about 4 mm thick. Overall length is about 16 cm with the short strap and key ring laid out naturally. Length and width are visual estimates; thickness comes from the caliper photo. These are rounded values, not precision specifications.
10When will it ship, and what will shipping cost?
US$29, including one box. Free shipping to the United States; US$5 per order to other destinations available at checkout. Expected to ship within one week of ordering.
One card, made part of your day.
US$29, including one box. Free shipping to the United States; US$5 per order to other destinations available at checkout. Expected to ship within one week of ordering.